A fireplace is often considered to be an excellent addition to any house. As for having an electric fireplace, it can have more benefits to offer than the traditional one. One of the most noticeable advantages is that it can provide a lovely ambiance and sufficient warmth of heat. This is much better because there will be no waste, nor will you be inconvenienced with preparing coal, wood, or gas. You can relax and enjoy the coziness and warmth provided by your electric fireplace. More than that, you can have peace because there will be no hassle and danger of a real fire.
However, before you can enjoy that, you should set up an electric fireplace. If not, you need to purchase one, and with that, you need to know how to measure fireplace dimensions correctly. Learn some of the essential steps and expert tips below.
Requirements to Measure Fireplace Dimensions
There are recommended tools needed to have for accurate measurement of fireplace dimensions. These tools are typically included with electric fireplace inserts.
Wood screws
Straight edge or Rulers
Measuring Tape
Fine-nib black marker.
Masking tape
Cordless drill or screwdriver
Pencil
A pro tip: Ensure that there will be enough space in the middle of the fireplace aperture and the adjacent wall before measuring for an electric fireplace insert.
How to Correctly Measure a Fireplace Dimension
While you may think measuring fireplace dimensions is easy, you may make mistakes if you don’t follow specific steps. This can lead to significant problems in the future, so it is better to be careful. Don’t worry; this guide is here to help you measure fireplace dimensions accurately. Thus, you will waste no time and money.
To measure your fireplace dimensions, you must write down its height, breadth, and depth. Remember, those are the necessary measurements, so make sure to document them correctly so you can avoid having issues with the insert. Precise measurement is needed. To do that, you must record each dimension at distinct locations.
Learn more on how to accurately and readily measure fireplace dimensions by reading on.
1. Determine the Installation Location for Your Fireplace Insert:
It will make things easier if you know how much area is required around the fireplace insert. While you are at that, it would be best to determine its placement. Ideally, the fireplace should be a minimum of three feet away from any air conditioner or furnace. The space will be necessary to protect the fireplace from hot or chilly air so it can function as expected.
Additionally, it is essential to measure the deepness of your firebox aperture precisely. You can do this by protruding tiles or ornamentation. Doing so will save you from adjusting your electric fireplace insert because there will be no obstructions.
2. Measuring a Fireplace Opening:
It is essential to determine the correct dimensions of your fireplace. Part of this is measuring the opening. Hence, it is better to measure at opening at multiple locations to ensure that no portions are smaller than others.
3. Height from the summit to the base:
Once you are done measuring the openings, you can then measure the height of your fireplace from the summit to the base. Don’t forget to measure the aperture and the lintel. With this, you can use a measuring tape to measure with ease. Be more thorough with the measurement, especially if you have an arched aperture. More importantly, make sure to record the correct fireplace dimensions at the lowest and highest points.
Moreover, a small number of masonry fireplaces have a lintel. This is a rod made of iron that lengthens from the front to the back of your fireplace aperture along the ceiling. It is important because it provides structural support for your electric fireplace. Typically, it is implanted in the masonry, though it can occasionally be seen. Thus, don’t overlook it.
4. Estimate the Width:
Width has a similar importance to the fireplace height. This means that it will not hurt to take a minimum of four separate measurements to measure the fireplace dimensions precisely. Here are the key things to do:
Estimate the front opening’s breadth at the top as well as the bottom.
Measure the top as well as the bottom of the rear wall of the mantle.
Assuming your firebox is inclined, you must take additional measurements.
In addition, the width is more likely based on the shape of your firebox. So, always cross-check the width at multiple heights. This will help to ensure the symmetry of your firebox. The breadth of square fireboxes should be uniform at every point. On the other hand, the dimensions of fireplaces with angled sidewalls will vary based on where you take the measurements.
5. Measuring for Depth:
Depth is another crucial aspect you need to pay attention to when measuring fireplace dimensions for an electric fireplace insert. What’s good about measuring the depth is that the previous step’s measurements so this step will be easy. Ideally, it is best to use the most diminutive measurement dimensions for your fireplace when selecting the ideal electric fireplace insert for your property.
You need to make an effort when it comes to measuring because it will minimize issues later on. In this manner, you won’t need to force your fireplace insert into position. Thus, your first time inserting the fireplace will come close to perfection.
6. Double-check the Mantle Dimensions:
When measuring fireplace dimensions, check the mantle twice before putting in an electric fireplace insert or shelf dimensions. The correct dimensions are essential for a successful fitting and for allowing sufficient space for ventilation and wiring around the opening. When calculating the proportions of your mantle, it is necessary to account for any likely restriction.
7. Certify Accuracy
Five measurements should be recorded for the dimensions of your fireplace: rear width, opening height, opening width, bottom depth, and rear height. Additional measurements are needed if your fireplace has an inclined firebox or a curved opening.
You should use small-scale measurements when selecting a fireplace insert, particularly if your firebox is inclined. Assuming you did not accurately measure the fireplace aperture, you might have to force the insert into position or modify it.
Measure Fireplace Dimensions: Standard for Electric Fireplace
AVERAGE
MINIMUM
MAXIMUM
Assembled Width:
55 in
15 in
108 in
Assembled Height:
31 in
16 in
77 in
Depth when assembled:
13 inches
4 inches
35 inches
Width of the fireplace
33 inches
6 inches
80 inches
Height of the firebox
20 inches
2 inches
39 inches
Firebox Depth
7 inch
3 inch
16 inch
FAQS
What dimensions does an electric fireplace have?
Electric fireplaces are available in different designs, allowing you to select one that typically complements the room’s scale. Some fireplaces span several feet or more, allowing the fire to be viewed from anywhere in the room. However, most standard electric fireplaces measure approximately 44 inches in width, 31 inches in height, and 13 inches in depth.
Can an electric fireplace insert be installed into a wood-burning fireplace?
A fireplace insert must be compatible with your existing fireplace. Before purchasing a device, measure the fireplace dimensions of your existing fireplace to ensure compatibility. Electric fireplaces are available in sizes ranging from approximately 30 inches to at least 36 inches. Inserts may be as deep as 19 inches, but verify this depth with the manufacturer.
How much room is required for an electric fireplace?
Before determining how much space you need for an electric fireplace, you must decide whether you want a built-in or wall-mounted unit.
What else should I think about before installing an electric fireplace?
In addition to wall space, you must follow standard fire safety practices by leaving ample space around the fireplace when measuring its dimensions.
Conclusion
Before going through your options for an electric fireplace, preparing the location is needed to ensure that you will not buy one that will not fit. Measuring your fireplace’s dimensions is a requirement if you want your fireplace to complement its surroundings harmoniously. Therefore, take your time to complement its surroundings harmoniously. Be keen with the measurements to make the most of your effort. Hopefully, this blog can help you do that.
Hi everyone! My name is Jason, and I am the founder of HeaterWise.com. Having run my own business as a Heating Engineer for 21 years, I have picked up a few things along the way.
I wanted to create Heater Wise as a place where anyone could come, from far and wide, to find the information that they need.
I hope you will join us here at Heater Wise, to get started on your own journey, to expand your knowledge, and make the best heating choices for you and your family.
